TenTec Microphones For Sale:
.
TenTec 707 "Regal" Desk Microphone For Sale:
The Ten-Tec 707 desk mic is a uni-directional
dynamic microphone that is designed for superior
sound quality. This is truly the Cadillac of
microphones! It has an all chrome housing with
a two position PTT switch with an ON/LOCK
function and a four pin XLR mic connection
on the bottom.
Specifications:
Unidirectional Dynamic Mic
Frequency Response: 50 to 16,000 Hz
Output Impedance: 250 ohms
Housing: Chrome plated
Dimensions: 6 5/8 high x 2 wide x 2 5/8 deep
Weight: 1 pound 3 ounces
This particular mic works 100% and looks like
NEW. It has been very lightly used, if at all.
Perfect condition, still in its padded carrying
case.
Buy it with paper work and cord with round 8 pin
connector for only $125.
.
Regular Desk stand, about six inches high, round base.
It can be used with 707 above or any other mic
requiring 5/8 inch 24 stand. $20
.
TenTec 705 Desk Microphone:
The 705 desk mic is the standard desk mic used with
many TenTec rigs. This one has an 8 pin plug wired
for TenTec on it. This means it also fits Yaesu
rigs with the round 8 pin plug.
It has an electret mic element so it has great
frequency response.
This one works 100% and looks very close to
new, with no scratches or defects.
The foam wind screen is even in good shape.
With paper work for $79.
.
TenTec 708A Desk Microphone:
-
The 708 A desk mic is a standard desk mic used
with many TenTec rigs. This one has an 8 pin
plug wired for TenTec on it. This means it also
fits Yaesu rigs with the round 8 pin plug.
-
The 708 is a dynamic mic on a flexible goose
neck and is entirely metal, with no plastic
parts. It is similar to the TenTec 705 desk mic,
but MUCH more heavy duty.
-
This one works 100% and looks very close to
new, with one exception. The little peg used
for PTT has been broken. If you use VOX it
will be just perfect for you, as it works
great on VOX. Otherwise, you can activate
the PTT switch with tip of a pen or a small
screwdriver, or you could replace the switch.
It has no scratches or defects.
The wind screen is in good shape,
and it is still in its original box.
Buy it with paper work for $79.
.
TenTec 215 P Microphone For Sale:
.
The 215 P mic is a high impedance microphone that
is used on many of the early TenTec rigs such as the
Tritons, Delta, Omni A, B, and C (both analog and
digital).
Of course it can be used with non TenTec rigs requiring
a high impedance microphone as well.
It is sometimes called a "banana" mic, and is a gray color..
This one works fine. It has a regular cord (not a coiled
cord) with a 1/4 inch stereo plug.
.
With paper work for $55.
.
TenTec 214 microphone:
The 214 looks very similar to the 215 (above),
but is brown in color.
Electrically, it is much different. It is an
electret mic, which means it has great frequency
response, but requires a polarizing voltage. It
has a 4 pin plug as used on TenTec rigs such as
the Corsair, Omni V or VI, Pegasus, Jupiter, and
others. It needs the four pins for mic audio, PTT,
polarizing voltage, and ground. Of course this could
be changed to an 8 pin plug, if desired.
This one works great and sounds great. Cosmetically
it is very nice.
With paper work for $79.
.
Astrocom Microphone Headset:
-
These are a set of extremely "noise reduction"
headset, along with a boom microphone connected
to them. They are terminated in a female 5 pin
DIN connector.
-
The cable is Astrocom 10274. The earphones
say Sonetronics on them. The microphone is
M-138/G, which is a dynamic mic with 150 ohm
impedance, and 300 to 7000 Mhz frequency
response.
-
One thing for sure. If you put these headphones
on, you do not hear any outside, extraneous
noise. Of course that is what one would want
from an aviation headset. Of course they work
well for ham use also.
They are very well made!
-
These work fine, and look fine.
Buy them for only $35
.
TenTec Hand Microphone:
This mic is similar to the TenTec model
700, although I do not find that number
on it. It is black plastic case, with
PTT switch. It is an electret mic, with
great frequency response, and a 4 pin
mic plug. $30
.
XLR Cables
All of these cables have a very nice rubber
covered cord, with a 3 pin female XLR
connector on one end.
About 8 feet long, with male 3 pin XLR
connector on other end (extension
cable) $28
20 feet long, extension cable (as above),
still in package, new. $35
About 25 feet long, extension cable (as
above), $35
About 8 feet long, with 1/4 inch mono plug
on the other end. $25
About 8 feet long, with nothing on the
other end. $20
.
XLR Microphone Gender Changers For Sale:
Male to Male gender changer
Male 3 pin XLR connector on both ends to
change gender. Works and looks like new. $10
Female to Female gender changer
Female 3 pin XLR connector on both ends to
change gender. Works and looks like new. $10
Female 3 pin XLR to 1/4 inch plug. $10
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400
.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|