Topband
[Top] [All Lists]

TopBand: Bev and ts930s

To: <topband@contesting.com>
Subject: TopBand: Bev and ts930s
From: geoiii@bga.com (george fremin iii)
Date: Thu, 10 Oct 1996 23:29:37 -0500 (CDT)
>John, the TS930 has a separate receive antenna jack on the rear panel.
>Plug the bev. in there and throw the slide switch next to it.  The radio
>does the rest.

Wrong - that plug diverts the antenna to a second receiver - it
does not provide for external antenna input.

To get into the receive loop on the ts-930 you need 
to use the transverter din connector.  

BTW - some 930s that I have seen have been modified so that
the plug that Brad is talking about does do what he describes 
but this is *not* how it comes from the factory.

(I bought one new - still have it - I have used *ALOT* of diffrent ts930s)

-- 

George Fremin III
Austin, Texas C.K.U.   
The operator formerly known as WB5VZL
512/416-7010               
geoiii@bga.com

--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>