Message-ID: <330E66A4.7260@wtco.net>
To: <topband@contesting.com>
Date: Fri, 21 Feb 1997 22:23:17 -0500
From: robert dugan <cwdxer@wtco.net>
Reply-To: cwdxer@wtco.net
X-Mailer: Mozilla 3.0 (Win95; I)
MIME-Version: 1.0
To: dx@ve7tcp.ampr.org
Subject: WHO IS USING A COMTEK ARRAY SWITCH SYSTEM ?????
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
hello de bob .... thanks for reading .. i am looking for input on the
ComTek ACB-4 OR ACB-4/80-40 PHASED VERT ARRAY SYSTEMS !!! i am moving
to a new qth and will maybe have the room for a 4 sq array on 40 or 80
or maybe the 40/80 system they show .. i would like to know hw well they
wrk ?? and what you think of the system ??? anything special i should
know abt ??? i would think the 40/80 combo would be good but, hw much of
a compromise is that system ??? ... my current set-up is a sigle vert on
40 and 80 both using the elevated radial method ... also please tell me
if you use radials on the grnd {hw many ?} or use the elev. radial
system.... any help on this subject would be of great help !!!!
73 de bob N1NY ex { WW1O }
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|