At 11:27 PM 7/15/97 -0500, you wrote:
>Anyone know of a good article in a magazine past or present on installing a
>4 square
>vertical system for the lower bands 160 - 40 meters?
>I would like to see info on first putting in 2 verticals then upgrading it
>to 4 later.
>Been looking at the butternut hf-2v with 160 meter add-on. This will cost
>a fortune.
>May just home brew the whole thing. May just end up doing 40 / 80 meters
>only.
>Would like to get all the info I can for this. I have plenty of room and
>not such a
>fat wallet hi hi. Thanks to all.
>
>BTW my 160 m wire inverted L , bent at 95 ft with 4 radials is working!!!
>73's....Steve....NW9G
>
Forgot one thing, is there a company out there that makes the phasing units
for this?
thanks.....
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|