| To: | <topband@contesting.com> |
|---|---|
| Subject: | TopBand: BELDEN 9913 vs RG-213 |
| From: | km3g@cts.com (Lane C. Zeitler) |
| Date: | Thu, 9 Oct 1997 19:06:38 -0700 |
Gentlemen, I loaned out my ARRL Handbook hence this question: Which has the lower loss per 100 feet at 30 mhz and lower-- 9913 or RG-213?? I am ready to make up phasing lines for a phased array and prefer to use the lowest/most economical coax. Comments always welcome. Lane Kilo Mexico Three Germany San Diego - --- FAQ on WWW: http://www.contesting.com/topband.html Submissions: topband@contesting.com Administrative requests: topband-REQUEST@contesting.com Problems: owner-topband@contesting.com |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | TopBand: RE: loops and preamps, K3BU@aol.com |
|---|---|
| Next by Date: | No subject, Scott Millick |
| Previous by Thread: | TopBand: BELDEN 9913 vs RG-213, Robert Kile |
| Next by Thread: | TopBand: Beverage feed line routing, Richard Karlquist |
| Indexes: | [Date] [Thread] [Top] [All Lists] |