To: <topband@contesting.com>
> Date: Thu, 26 Mar 1998 10:04:55 -0500 (EST)
> Tom that agrees right on the nose with the ARRL Antenna Manual ( 17th
> Edition here) ground conductivity chart. Most of GA is rated at 4 mS/m
> on the chart wheras my QTH is listed as 1 mS/m.
>
> Would you agree that chart is at least a good starting place to begin
> ground system planning?
It would certainly be much better than sticking two rods in the very
top layer and measuring the surface at near-dc frequencies.
73, Tom W8JI
w8ji.tom@MCIONE.com
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|