I'm about to install a 2 wire Beverage (580ft, 7ft high, 14AWG) and would
appreciate advice on:
1)Use an end termination transformer (wind my own) or just ground/float the
far end?
2)Okay to let the spacing vary a bit (6 - 12 inches) with the tree trunk
diameters?
And any other comments/advice would also be warmly received ;-)
(I've got ON4UN and W1WCR's books)
Tnx & 73,
Barry N1EU
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|