Topband
[Top] [All Lists]

No subject

To: <topband@contesting.com>
Subject: No subject
From: artinian" <s56a@bit.si (artinian)
Date: Fri, 25 Aug 2000 21:05:49 -0000
W8NF wrote:

>As W8JI points out, you
>can always put an attenuator inline with an
>overly-sensitive receiver, but there is
>nothing outboard that can be done to fix a poor IMD >issue.

IMD are caused by third order products!

10 dB attenuator would reduce IMD by 30 dB.  10 dB of excesive gain would
increase IMD by 30 dB...

I am still waiting for the measurements of 160m night signal and noise levels
in GA?

73 de Mario, S56A, N1YU






--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • No subject, <s56a@bit.si (artinian) <=