W4NF:
>My lowest VSWR is 2:1 at 1.830 and it climbs quickly either side
>of that freq. I figure that the antenna is probably at about 35 ohms.
>looking for some sort of homebrew design of a matching network
First, it's 25 ohms. And a simple shunt fed inductor at the feedpoint is
very simple, easy and cheap to construct and adjust there. Also known as
a Z match, it connects across the feedpoint with the inner conductor of
the coax at its top. Just trim for 1 to 1 SWR. Ball park is maybe 5
turns of 3 inch diameter air core or a few turns on a T-200 toroid core.
73, Roy K6XK/0
--
FAQ on WWW: http://www.contesting.com/FAQ/topband
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|