This is a follow-up to my previous post. That calculation was done with
MININEC ground.
When I changed just the ground type to Real/High Accuracy the impedance
changed to 23.51 + J 0.5327 ohms.
In both cases I used Medium conductivity.
This should give Rich, W1TSP, an idea of what to expect. If the horizontal
wire droop, ala an inverted vee look, the impedance will be lower.
73, Tom, W1TO
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|