Topband
[Top] [All Lists]

Re: Topband: Non-inductive resistors

To: "Joe Wilkowski" <k8fc@k8fc.com>, <topband@contesting.com>
Subject: Re: Topband: Non-inductive resistors
From: "Michael Tope" <W4EF@dellroy.com>
Date: Thu, 18 Dec 2003 13:28:03 -0800
List-post: <mailto:topband@contesting.com>
Joe,

Have you tried the ceramic composition resistors that Digi-Key
sells. I think they have them in 1 and 2 watt varieties. They are
fairly cheap and available in small quantities.

Mike, W4EF..................

> Folks,
> can anyone recommend a source for relatively inexpensive non-inductive
resistors.  I have exhausted my supply.  I need  ~ 6 or so resistors in the
450-500 ohm range (1 watt or better) for my beverages.  They are hard to
single source and very expensive even in lots.  In addition, many
manufacturers say they are non-inductive but that is not necessarily true at
1.8 MHz.    Carbon composition seem to be the only non-inductive resistors
at 2 MHz.
>
> Thanks in advance




_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>