Topband: re sloper array

["theo" <theo.bemelmans@pandora.be>]

Well thanks for all who answered on my questions,and yes indeed its a quarter 
wave sloper so sorry for the mistake;
i did some modeling in eznec as well,even with the beams modeling on top of it.
Its not that simple because if i would model a second one i should use two 
times the same wire (actualy the tower);

ON4AEK
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband