Hello to all,I have modified a hy-tower to single band 160.In the top
section of the tower I have a loading coil made of nr12 solid copper wound
on a 2in form.The only way I could think of to wind the coil was bt cut and
try.OK,here's the problem.After some cutting and trying last weekend I got
her to abt 1780.OK,I am close..This weekend I removed abt a foot or so...Now
at 1760...I am at a loss as what to do.I have seen this on some mobile base
loads as far as taps.I do have a 259b if measurements would
help...thanks,john
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|