Topband
[Top] [All Lists]

Re: Topband: IC-756 Pro II CW Settings

To: btippett@alum.mit.edu
Subject: Re: Topband: IC-756 Pro II CW Settings
From: Earl W Cunningham <k6se@juno.com>
Date: Tue, 15 Nov 2005 07:49:06 -0800
List-post: <mailto:topband@contesting.com>
Bill, W4ZV wrote:

"John WD1V responded with the following webpage which shows CW waveforms
for a Pro II.  Looks like this is another case where the default should
be 8 ms and no higher than 6 ms."
==========
On the Pro2 and Pro3, the factory default CW rise time setting is 4 msec
and results in clicks +/-1.5 kHz.  6 msec is a bit better, with clicks
+/-1.0 kHz.  All users should set this to 8 msec (the max) to reduce
their clicks to +/-500 Hz.  The actual CW rise/fall time for this radio
is about half of the menu setting.

73, de Earl, K6SE
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>