| To: | <topband@contesting.com> |
|---|---|
| Subject: | Topband: FW: Thoughts on making low resistance joints betweenaluminiumtubing sections? |
| From: | "George Stewart, VK5ALS" <ggstewart@adam.com.au> |
| Date: | Thu, 31 Aug 2006 12:43:14 +0930 |
| List-post: | <mailto:topband@contesting.com> |
Hi Topbanders, Posting with Pat, W5OZI's permission. --------------------------- TENNADYNE uses graphite powder before inserting telescoping sections and pinning them with SS screws. Naturally, the aluminum should be polished beforehand. 73, Pat, W5OZI _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: FW: Thoughts on making low resistance joints betweenaluminiumtubing sections?, George Stewart, VK5ALS |
|---|---|
| Next by Date: | Topband: Regarding ==> Thoughts on making low resistance jointsbetween pieces of AL, Dick and Adele Bingham |
| Previous by Thread: | Topband: FW: Thoughts on making low resistance joints betweenaluminiumtubing sections?, George Stewart, VK5ALS |
| Next by Thread: | Topband: Regarding ==> Thoughts on making low resistance jointsbetween pieces of AL, Dick and Adele Bingham |
| Indexes: | [Date] [Thread] [Top] [All Lists] |