> Is there anything on your web site that discusses how one could run a
> check
> on the MFJ-259B and feel comfortable that their analyzer diodes are
> functioning correctly? [preferably a simple check that requires modest
> standards and equipment]
>
> Tod, K0TO
Tod:
Get a 51 ohm non inductive resistor and put across the input. It should read
50 ohms and zero reactance or
close.
Put a known capacitor or inductor value a cross the resistor. Calculate the
reactance value
at a frequency, tune it to that frequency and the reactance reading should
also be close.
73 Price W0RI
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|