Re: Topband: Modeling verticals (fat, skinny, etc) on EZNEC

["Richard (Rick) Karlquist" <richard@karlquist.com>]

-----Original Message-----
From: Telegrapher9@aol.com [mailto:Telegrapher9@aol.com]
Sent: Friday, December 22, 2006 7:37 AM
To: olinger@bellsouth.net; richard@karlquist.com; topband@contesting.com
Subject: Re: Topband: Modeling verticals (fat, skinny, etc) on EZNEC


If anyone is interested in how to measure in calibrated volts per meter in
NEC (it will work the same in EZNEC) just post here.

    Dave WX7G
------------------------------

Isn't that just a 2 meter monopole with a high impedance
load on it?  Then the volts are also volts/meter.

Rick N6RK


_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband