To: | "Topband@contesting.com" <Topband@contesting.com> |
---|---|
Subject: | Re: Topband: Best Height Above Ground for a Beverage RX Antenna |
From: | "Jim Brown" <jim@audiosystemsgroup.com> |
Date: | Wed, 10 Jan 2007 18:26:26 -0800 |
List-post: | <mailto:topband@contesting.com> |
On Wed, 10 Jan 2007 19:08:26 -0600, Ford Peterson wrote: >I note that the "almost useless on 40" comment may be due to reasons that go >well beyond height above apparent ground... Perhaps. They are reversibles, using DXE hardware at both ends, 400 ohm line, switching, and preamp. They're in a redwood forest and the ground is pretty wet, so perhaps the ground is too good. :) Jim _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
Previous by Date: | Topband: Resistor Protection?, lew |
---|---|
Next by Date: | Re: Topband: Best Height Above Ground for a Beverage RX Antenna, Richard (Rick) Karlquist |
Previous by Thread: | Re: Topband: Best Height Above Ground for a Beverage RX Antenna, Ford Peterson |
Next by Thread: | Re: Topband: Best Height Above Ground for a Beverage RX Antenna, Richard (Rick) Karlquist |
Indexes: | [Date] [Thread] [Top] [All Lists] |