| To: | topband@contesting.com |
|---|---|
| Subject: | Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements |
| From: | Bill Tippett <btippett@alum.mit.edu> |
| Date: | Fri, 16 Feb 2007 06:17:36 -0500 |
| List-post: | <mailto:topband@contesting.com> |
W4EF:
>"It has essentially the same dynamic range regardless
of tone spacing"
True but BDR is ~100 dB for the SDR-1000 versus
~130 for other rigs (ARRL measurements). BDR seems to be
the weak point of SDR so far. Perhaps 32-bit sound cards
will eventually solve this issue but current 24-bit sound
cards all seem to share this weakness.
73, Bill W4ZV
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements, Tom Rauch |
|---|---|
| Next by Date: | Re: Topband: (no subject), Tom Rauch |
| Previous by Thread: | Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements, Robert McGwier |
| Next by Thread: | Re: Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements, Michael Tope |
| Indexes: | [Date] [Thread] [Top] [All Lists] |