DGB wrote:
> I understand the length of an "L" is typically a 1/4 wave, up so far and
> out the remainder. What about a "T" ? Is the total length of the T top
> what's left over after the vertical section length?
>
> thanks 73 Dwight NS9I
For a T, the sum of the vertical wire plus half the top wire
should be 1/4 wl for resonance. For example, a 90 ft vertical
needs an 80 ft top wire if 1/4 wave is considered 130 ft.
This is a rule of thumb; for exact answers use NEC.
Rick N6RK
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|