| To: | topband@contesting.com | 
|---|---|
| Subject: | Re: Topband: down hill slope for a beverage | 
| From: | Tree <tree@kkn.net> | 
| Date: | Sat, 23 May 2009 09:04:57 -0700 | 
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> | 
| On Sat, May 23, 2009 at 07:45:30AM -0400, Jon Zaimes AA1K wrote: > In the 1990s, I had a 660-ft Beverage at previous QTH in northern > Delaware that went from 90 feet elevation to 30 feet elevation. My Japan / SouthEast beverage is similar to this. One end is about 80 feet above the other - over a distance of about 500 feet. It is a single wire with relays and ground rods. It works very well in both directions. Tree N6TR/7 _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband | 
| <Prev in Thread] | Current Thread | [Next in Thread> | 
|---|---|---|
| 
 | ||
| Previous by Date: | Topband: Vertical offset from center of radial field, Charles Bibb | 
|---|---|
| Next by Date: | Re: Topband: down hill slope for a beverage, Bill Tippett | 
| Previous by Thread: | Re: Topband: down hill slope for a beverage, K4RO Kirk Pickering | 
| Next by Thread: | Topband: down hill slope for a beverage, VE3MGY | 
| Indexes: | [Date] [Thread] [Top] [All Lists] |