Wolfert, William R. wrote:
> resistor across the scope end is eluding me. I'm sure there's a
> down-and-dirty easy way to accomplish this. But how?
A BNC tee and a termination? There are also dedicated
50 ohm feedthru terminations for scopes.
> #2 I'm building the W1MK detector (LBDX Ch. 11, pg. 26) and am including
> the antennascope (6 dB Hybrid) on the same board. I also thought to just
> build a BCB reject filter and PB filter into the same box. Less to carry
> to the site is good, right? Since there's 2 channels, filters for each
> channel would be indicated. For simplicity, a rotary switch to select
The gotcha here is that the filters would have to be matched, or
they will decrease the accuracy. Matching high selectivity BCB
filters is a tall order, and no one sells matched sets.
Rick N6RK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|