k8gg@voyager.net wrote:
> When I model it as a shunt fed tower, base grounded, with 50 feet of 1.6 inch
> OD pipe about 27 inches
> from the center of the tower as the shunt feed rod, the gain drops to about 0
> (zero) dbi.
>
Modeling a gamma match for a tower is almost impossible to do in NEC2.
It can't handle a junction of wires that have large differences in
diameters. Check to see if the program is making errors. If you are
using EZNEC, set all resistive components to zero, wire loss to zero,
and set the ground to perfect. Run a 3D gain plot and check the
"Average Gain" on the main window. This will be the amount of error the
program is making. No you can't just add that amount to the answer.
Read the help file for more info.
Jerry, K4SAV
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|