Topband
[Top] [All Lists]

Re: Topband: Different Power Line noise thread

To: Sam Morgan <k5oai.sam@gmail.com>, topband <topband@contesting.com>
Subject: Re: Topband: Different Power Line noise thread
From: Herbert Schoenbohm <herbs@vitelcom.net>
Reply-to: herbs@vitelcom.net
Date: Sun, 29 Nov 2009 11:38:15 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>

Sam Morgan wrote


>  
> And after our first overnight 25 degree freeze of this winter,
> the next day when the temp went up to over 80
> (it's WTX what can I say)
> the noise came back with a vengeance and made any hf operations impossible
> until the next day when the temps were back to seasonal normals. 40s-60s
>
> Any clues what I might need to look for?
>   

Sam,  Very likely its loose pole hardware on the high tension 
connections, most likely at the transformer, which can easily be found 
by banging poles with a sledge hammer while listening on a AM radio.  It 
is easier if you have a 10 or 6 meter radio or even a Bearcat scanner 
with VHF Aircraft channels which will help in narrowing down the 
location.  Use some discretion when you bang on the poles.  Sometimes 
the connection is so loose that the brass washer is dancing. I think in 
your case the heat causes the metal expansion thus increasing the space 
to a connection and an arc occurs. 

The first time I did this in Minnesota the police were called "that 
there is a crazy person with a sledge hammer going around banging on the 
power poles" and they  arrived with a  mental intervention specialist! 

I did find an alternative that is less conspicuous....by backing the 
truck (with a good but gentle bumper) up to the pole and giving it a 
slight bump while in reverse.  Problem is that this can cause the HT 
line to oscillate a bit and the noise may sputter and even go away for a 
while but it is not necessary that pole. That is  why the AM RX at VHF 
really can narrow down your choices.

On nice thing, if you can call it that, in the tropics is every 5 years 
or less we get a big hurricane and a lot of old stuff is replaced.  Most 
of the copper is gone and replaced with aluminum wire which uses 
excellent AL/CU compression fittings.  I didn't think it would improve 
things but here it sure has with new plant installations now and then.  
Most of the work is done by Alabama Power's National Guard and those 
guys are awesome.  I always have a chest full of ice and some Coors 
light to give them when they work the neighborhood after a storm.

Good Luck

Herb, KV4FZ
>
>   
_______________________________________________
160 meters is a serious band, it should be treated with respect. - TF4M

<Prev in Thread] Current Thread [Next in Thread>