[Top] [All Lists]

Re: Topband: Elevated Feedline for RX

Subject: Re: Topband: Elevated Feedline for RX
From: "Jo, YC0LOW" <>
Date: Tue, 21 Sep 2010 06:52:53 +0700
List-post: <">>
I'd like to thank indeed those who privately responded to my previous
posting here. To summarize, the suggestions are:

- Dean, W5PJR: adding preamp, and coax/feedline isolation choke
- Bob, N7UA: using coax/feedline choke made of large ferrite material 73
- Jorge, CX6VM/CW5W
- Herb Schoenbohm, KV4FZ: using cable TV spec RG6 which has a solid
steel messenger, make small ferrite isolators ala W8JI
- Rick, N6RK: using a steel cable that stretches between anchors at the ends

Also, I had from Hi-Z Reflector:
-Craig, K1QX: running the control line with the coax. But, with the
issue of voltage drop in a 1500 ft run.

All great stuffs! Tnx es 73 de Jo, YC0LOW
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>