To: | <w0uce@nc.rr.com>, <topband@contesting.com> |
---|---|
Subject: | Topband: Length of inverted-L antenna for use with K2AV counterpoise |
From: | "Steve Ireland" <vk6vz@arach.net.au> |
Date: | Fri, 9 Dec 2011 17:46:11 +0800 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Hi Jack One question in regard to your drawing of the 160m antenna you use with K2AV's FCP counterpoise. Are you using a resonant quarter wave antenna (i.e. about 132' total length) with the counterpoise, or an extended inverted 5/16 or 3/8 wave antenna? I am guessing the former, but am also wondering if you have tried to use the latter, tuned with a series capacitor to remove the inductive reactance at the feedpoint. In the drawing, the length of the horizontal top section of your inverted-L is given (84.5 feet), but not the length of the vertical bottom section. Vy 73 Steve, VK6VZ _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: K2AV 160m Folded Counterpoise XFMR Photo Request, - |
---|---|
Next by Date: | Topband: Polar Routing - Sunspot Maxima, K1ZM |
Previous by Thread: | Re: Topband: K2AV 160m Folded Counterpoise Antenna - New Details Posted, Bill Wichers |
Next by Thread: | Re: Topband: Length of inverted-L antenna for use with K2AV counterpoise, Guy Olinger K2AV |
Indexes: | [Date] [Thread] [Top] [All Lists] |