Sounds like both of your ideas are good ones to try first. One other suggestion
is to change from a gamma to an omega match. You're pretty close now so if the
snow and cold doesn't impede your trips to the tower you ought to make that amp
happy w/o too much problem
Howard..K2HK
> From: rgarrett5@comcast.net
> To: j_fitton@yahoo.com; topband@contesting.com
> Date: Sun, 11 Dec 2011 12:21:56 -0500
> Subject: Topband: Changes To My Shunt Fed Tower
>
>
>
> My match on the tower went from 1.0 x 1. To 1.9 x 1 after I installed the
> new antenna. In terms of loss, this isn't a huge change but my amplifier
> doesn't like the change. Before I spend a lot of time running back and
> forth to the tower making random changes, any thoughts as to what I can do
> to improve the match. I'm currently using one series capacitor 1000PF for
> the matching network. I have attempted to adjust this capacitor but it
> looks like the 1.9 x 1 is the low point. Perhaps some thoughts - increase
> or decrease the spacing of the shunt wire? Move the connection up or down
> on the tower?
>
> Before I get to crazy, just wanted to look to the base of knowledge on this
> reflector for your input.
>
> 73 and tnx in advance.
>
> Bob K3UL
>
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|