Greg,
Yes, that's correct. Thanks for the fix. Been a long week.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Greg - ZL3IX
Sent: Saturday, December 31, 2011 1:29 AM
To: topband@contesting.com
Subject: Re: Topband: BAD OT:Phase noise *** RE: digital on 1838 +/-
Jeff, I suspect that you mean modern day synthesisers rather than
specifically DDS. Actually, the DDS itself has quite low phase noise,
better than -130 dBc/Hz with Analog Devices chips, especially if the
internal multiplying PLL is not used in the reference path.
73, Greg. ZL3IX
On 2011-12-31 06:30 p.m., Jeff Blaine wrote:
> Phase noise is generated by the rig's LO and exists as a more broad band
> low
> level signal. Issue is more significant with modern day DDS than with
> older
> analog-type VFO sources. Guys who operate field day can relate...
>
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|