Mike,
I use BNC connectors extensively (almost exclusively) in the receive paths in
my station, perhaps one hundred or more. They have their own shield integrity
issues, there's no silver bullet with BNC connectors either. If you ever
encounter a BNC connector that mates "too easily" there may be a shield
integrity problem with the connector. Off brand BNC connectors are
particularly problematic.
73
Frank
W3LPL
---- Original message ----
>Date: Fri, 13 Jul 2012 17:31:24 +0000 (UTC)
>From: mstangelo@comcast.net
>Subject: Re: Topband: Mother of all ferrite common-mode coaxial chokes
>To: Tom W8JI <w8ji@w8ji.com>
>Cc: topband@contesting.com
>
>Tom and All,
>
>I also use phono connectors on some older radios. I'd prefer to substitute BNC
>connectors but I don't want to modify the equipment.
>
>What I find helpful is to squeeze the shell of the plug so that it will fit
>tightly on the female receptacle and cover the shell with heat shrinkable
>tubing so that the pressure is always applied to the connection.
>
>Mike N2MS.
>
>----- Original Message -----
>From: Tom W8JI <w8ji@w8ji.com>
>To: topband@contesting.com
>Sent: Fri, 13 Jul 2012 16:08:18 -0000 (UTC)
>Subject: Re: Topband: Mother of all ferrite common-mode coaxial chokes
>
><snip>
>
>Because I use phono plugs that really have improper shield grounding
>integrity, and sometimes the pressure connections add a tiny bit of unwanted
>shield impedance to the groundplane of "the box entrance", I use high
>impedance beads on these particular cables. I also, as a practice, keep an
>eye on those connectors. I use those connectors by necessity, because
>several of my radios use phono plugs for external antenna ports, and there
>is no easy way to change connectors.
>
>_______________________________________________
>UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|