I am presently using a 30' base loaded vertical. The ground system
consists
of 90 radials from 12 to 25 feet. The base referred ground loss is 10
ohms.
The problem is we really can't measure ground loss at the base.
Let me give an example....
A 40 meter vertical here, 1/4 wave tall of fixed length.
Four elevated radials had less than 40 ohms feed resistance. About a dozen
buried radials had around 60 ohms base resistance.
Field strength was identical despite the resistance difference with the same
length resonant radiator.
Others have measured the same type of thing, and it is easy to duplicate
results like this.
73 Tom
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|