To: | <topband@contesting.com> |
---|---|
Subject: | Topband: Beverage wire under road pictures |
From: | "Neil G0JHC" <g0jhc@blueyonder.co.uk> |
Date: | Sun, 28 Oct 2012 08:20:56 -0000 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
I have added some pictures of how I did this, http://www.qrz.com/db/g0jhc scroll down a little. This gave me the missing link to join 2 Beverages SWR match good 1.1-1.8 SWR between 1.8-7MHz with X between 0 and 10. Hope this gives others some ideas when needing to cross paths/roads. Early results show good F/B and ?normal? operation like any of my others which are all above ground. 19ft out of 700ft is underground and the 19ft is approx. ½ way along. Neil G0JHC _______________________________________________ Topband reflector - topband@contesting.com |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Monopole Elev Pattern w.r.t. Earth Conductivity, Richard Fry |
---|---|
Next by Date: | Topband: dipole height, Bob Kupps |
Previous by Thread: | Topband: Vertical with elevated transmission line?, D Rodman MD |
Next by Thread: | Topband: dipole height, Bob Kupps |
Indexes: | [Date] [Thread] [Top] [All Lists] |