Topband
[Top] [All Lists]

Re: Topband: Patience in ARRL 160 Contest

To: David Raymond <daraymond@iowatelecom.net>, TopBand <topband@contesting.com>
Subject: Re: Topband: Patience in ARRL 160 Contest
From: James Rodenkirch <rodenkirch_llc@msn.com>
Date: Sat, 1 Dec 2012 14:32:04 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Dave's observation regarding us QRPers being patient as the bigger stations 
will work hard to pull us through is spot on!  PJ2T, for instance, tried VERY 
hard to work me this morning but no joy and it wasn't 'cuz he hadn't worked his 
burtt off to get my call in the log.  

I agree that the bigger stations do try hard (other stateside examples, similar 
to the PJ2T mention above abound) BUT...some of those "fair to middlin' ops" 
need a reminder to listen a little more....either that or turn the RF gain down 
some to get the noise abated some...I've got 147 Qs in the log from about 5 
hours of operating and could have a noticeable greater number, I suspect, if 
those middle-of-the-road ops would listen a tad more and not just expect HUGE 
signals to come bounding throug their front ends.  Hi Hi

Looking forward to working a LOT more of you guys this evening and in to 
tomorrow morning!  

Great post, Dave!  72, Jim Rodenkirch K9JWV

> From: daraymond@iowatelecom.net
> To: topband@contesting.com
> Date: Sat, 1 Dec 2012 15:11:32 -0600
> Subject: Topband: Patience in ARRL 160 Contest
> 
> Fellow Lowbanders and Contesters. . .
> 
> I'm reminded of some not so new wisdom from operating the contest last night. 
>  Big stations, don't forget to listen for the weak signals.  It may be well 
> be DX calling you among the cacophony of stateside callers.  It pays 
> periodically to stop and ask for DX.  That encourages our DX friends to 
> participate in the contest. . .and you may well be rewarded.
> 
> You smaller stations, particularly QRP, most of the bigger stations will 
> really work hard to pull you through for a successful QSO.  Please be patient 
> and don't mind being repeatedly asked to give your call again.  Many 
> topbanders have multiple antennas in the arsenal, one of which might be the 
> one to pull out your call coming from a 5w transmitter going to your 40m 
> dipole.  There were some incredibly weak stateside signals last night which 
> took some time to get, but a little patience on both ends can bring mutual 
> success.  
> 
> Contest conditions last night were surprisingly good.  I purposely avoided 
> using the TX array and dropped the power to about 700w and ran on the 1/4 
> vertical (an omni antenna is nice during the contest anyway).  My thought was 
> to be weak enough to avoid having EU call me and not being able to hear them 
> through all the stateside callers.  Well, thankfully, conditions were good 
> and EU called anyway.  It was a exciting to have F, G, LA, OK, ON, S51, and 
> others call in (at which time I upped the power and went to the TX array).   
> I did, periodically, try to stop the run and call for DX and several times 
> and, on several occasions, found an EU station waiting patiently to work me.  
> If one of us stateside is asking for DX, it would be great for NA callers to 
> stand down for just a moment.  Most did but some persisted in calling anyway, 
> sometimes blocking an apparent EU caller. 
> 
> And lastly, a word about the DX window.  The DX window is something that is 
> mutually beneficial and give our DX friends a limited (darn limited with only 
> a 5 KHz) window to be heard.  It's simple. . .ignoring this only discourages 
> DX participation.   
> 
> I slept in this morning and missed what must have been some terrific 
> conditions to JA.  Hope we have some more great conditions tonight and in the 
> morning.
> 
> 73 and see you on the air. . .Dave
> W0FLS
> _______________________________________________
> Topband reflector - topband@contesting.com
                                          
_______________________________________________
Topband reflector - topband@contesting.com

<Prev in Thread] Current Thread [Next in Thread>