Topband
[Top] [All Lists]

Topband: Fwd: Re: Desktop Power Supply Brand/Noise Question

To: Topband Mailing List <topband@contesting.com>
Subject: Topband: Fwd: Re: Desktop Power Supply Brand/Noise Question
From: Gary K9GS <garyk9gs@wi.rr.com>
Reply-to: garyk9gs@wi.rr.com
Date: Sun, 21 Jul 2013 09:59:18 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I think Pete meant to send this to the list.  if not, my apologies Pete.


-------- Original Message --------
Subject:        Re: Topband: Desktop Power Supply Brand/Noise Question
Date:   Sun, 21 Jul 2013 09:52:25 -0400
From:   Pete Smith N4ZR <n4zr@contesting.com>
To:     garyk9gs@wi.rr.com



I did exactly what Gary suggests to clean up the power supply on my homebuilt octo-core machine (back when it was a dual core Pentium hi). Corcom is one of several brands - even the best costs only ~$10. I had to do a little surgery on the IEC connector hole in my cheapo supply, but it was worth it!.

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 7/20/2013 5:11 PM, Gary K9GS wrote:
Hi Clay,

One thing you might want to check.

See if you can get inside the power supply...disconnect it first. Take a look on the PCB near the power connector. There may be a space on the PCB where you can install a power line filter....something like a CorCom or similar. Sometimes they leave them out on some models to save money.

If you Google CorCom you find info on the different models...just be sure to get the correct ratings. They also sell filters with built-in IEC connectors. An IEC connector is what the power cord plugs into. you may be able to get one that works.



On 7/20/2013 9:27 AM, Clay Melhorn wrote:
Hello to the group.I recently built an AMD quadcore machine I intend to eventually replace my trusty XP Pro machines. Foolishly got in a hurry to complete the build and purchased a PS from a local shop.It supplies the power required without issue, I have discovered why the price was so good.Jim Brown will love this one, virtually no RFC filtering, you get what you pay for and I know betterjust didn't realize the noise from 40m and down would be SO intense particularly on a Delta pennantthat points back toward the shack's general direction. The XP machines are very quiet.Live and learn. Question: Looking at another "good deal" how do the COOLER MASTER PS's rate for RFC filteringor are there others brand I should be looking at? http://www.newegg.com/Product/Product.aspx?Item=N82E16817171031&nm_mc=EMC-EXPRESS072013&cm_mmc=EMC-EXPRESS072013-_-EMC-072013-Index-_-PowerSupplies-_-17171031-L04B Will likely not waste time trying to make a Cadillac out of the Yugo I purchased.

Thankyou in advance,

Clay Melhorn N9IO Bonfield, ILWebmaster: KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/

_________________
Topband Reflector




--


73,

Gary K9GS

Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032   http://www.cwops.org

************************************************



_________________
Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>
  • Topband: Fwd: Re: Desktop Power Supply Brand/Noise Question, Gary K9GS <=