Topband
[Top] [All Lists]

Re: Topband: Topband Inv-L Joy

To: Gary@ka1j.com
Subject: Re: Topband: Topband Inv-L Joy
From: "deswynar xplornet.ca" <deswynar@xplornet.ca>
Date: Thu, 25 Jul 2013 09:50:06 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Hi Gary,

Try getting your weight over the limb with a good fishing rod  reel
combination. I use a Zebco-brand spin-cast reel here myself, & the longest
pole I can find...

To help find the landing spot of your weight in the underbrush, get
yourself a buzzer & tape it to a 9-volt battery. I did that here with an
old seat belt warning buzzer pulled from a Chevy in the junk yard: just
before I cast this weight (I tape the buzzer & battery together), I connect
the buzzer, and can easily find it in any thicket by simply following the
sound of the buzz...

A sorta red-neck homing device, for sure, but it works for me & saves me a
TON of time looking for the end of the line...

~73~ de Eddy VE3CUI - VE3XZ


On Thu, Jul 25, 2013 at 1:22 AM, Gary Smith <Gary@ka1j.com> wrote:

> Had a more difficult time getting the antenna up there this time. The
> first spud snapped away from the fishing line & in the dense thicket
> I was unable to find where it landed. Had to make another & the
> mosquitos were so thick they posted a LUAU sign on my forehead.
>
> Till I get something better I retrieved my WD-1A military field phone
> wire that was left out in the marsh as my old beverage wire. and
> after a comedy of errors I finally got the antenna up.
>
> I was earlier getting a SWR of 1.1 on 160 before and now am getting
> 1.1 on 1.74365 MHZ
>
> 1.74365mhz
> R=51 X= 6,7,8
> swr 1.1
>
> At the desired frequency to match the antenna I've aimed for 1.8MHZ
> here's the information I was able to get at my desired frequency:
> 1.8025 mhZ
> Coax loss 6.3db
> C=4193  XC=21
> L=1.970  X1=21
> r=41 x=21 swr 1.6
>
> So this is what the antenna is giving me at this moment. I need to
> get back down and add the broken wire to the radial bed and I should
> also trim some length to bring my values to 1.1 at 1.025MHz.
>
> Given the info above from the MFJ 259B any idea how much I might
> nibble off and more, is there anything in this info that tells me I
> should look to do anything differently?
>
> Hopefully the coax loss will be mitigated by a friend bringing me
> 350' of hardline. Can't wait!
>
> Thanks,
>
> Gary
> KA1J
> _________________
> Topband Reflector
>
_________________
Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>