Topband
[Top] [All Lists]

Re: Topband: Insulator problems

To: <topband@contesting.com>
Subject: Re: Topband: Insulator problems
From: "Doug Scribner" <dscribner@myfairpoint.net>
Date: Tue, 17 Dec 2013 14:29:20 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Try here Herb,

http://www.surplussales.com/antennas/antennas-6.html

http://www.daburn.com/10-58ceramicfeed-thruinsulators.aspx

I have not purchased from either of these 2 places...

Doug - K1ZO


----- Original Message ----- From: "Herb Schoenbohm" <herbs@vitelcom.net>
To: <topband@contesting.com>
Sent: Tuesday, December 17, 2013 2:19 PM
Subject: Re: Topband: Insulator problems


My 160 meter ATU uses an old military box with the original behive feed thru insulator that is starting to crumble. I haven't been able to find a pocelin feed thu of that size (about 3'') and the ones on e bay are very small. Any suggestions for a source?


Herb Schoenbohm, KV4FZ









On 12/17/2013 3:09 PM, W9UCW@aol.com wrote:
When I lost my last set of monster buss bar ceramic insulators to breakage
due to a broken guy line on the tower, I replaced them  with artificial
wood. I used 4 X 4's. It machines easily and works flawlessly wet or dry with full power even in very high voltage conditions. The material is actually made from recycled milk containers, so the factory told me. Anyone who wants
a picture, I'll send it to you.
73, Barry W9UCW
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband


_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>