Topband
[Top] [All Lists]

Re: Topband: Radial Question

To: "topband@contesting.com" <topband@contesting.com>
Subject: Re: Topband: Radial Question
From: David Aslin <david@aslinvc.com>
Date: Mon, 6 Jan 2014 21:25:52 +0000
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I could not resist a comment - 12,500 sq. ft is tiny ??!
Spare a thought for the topband community in G-land: the *average* garden (i.e 
the lot size less the house area) is 970 sq. ft.  Many new homes have no garden.
While I search for a contest/DX location, we are renting a beautiful new home - 
on a 'huge' 5000 sq. ft lot.  So if my 160m signals are weak, listen harder - I 
only have room for 0.05 wavelength radials...
Bob, good luck with the radials project.  You will be loud...
73
Dave G3WGN  M6O  WJ6O

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Chortek, Robert L - Monday, January 06, 2014 6:44:03 PM
Hello Fellow Topbanders -

We are about to embark on a front yard landscaping project at our home on a 
tiny 12, 500 sq. ft. lot.

It occurred to me this would be an excellent opportunity to put down a large 
number of buried ground radials BUT, they  would only cover about 90 degrees of 
the compass. Then it also occurred to me I could put down a large number of 
radials in our crawl space under the house.

So, my question is, what is the likely negative impact, if any, from the house 
being between the 160 meter vertical and the radials placed under the house?  I 
assume the house material, most of which is wood, tile, sheetrock, etc. (with 
the usual house wiring) would be invisible to RF and have minimal impact.

If I could put down say 60 radials ranging in length from 40  to 120 feet long, 
would it outperform my current system with 8 resonant elevated radials 10 -15 
feet high (which cover only about 120 degrees of the compass)?   I'm incline to 
proceed IF it would provide a meaningful improvement in my transmitted signal 
strength.

Thanks for any help!

73,

Bob/AA6VB

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>