Topband
[Top] [All Lists]

Re: Topband: Bad tower shunt capacitor

To: "James C. Hall, MD" <heartdoc@nwtcc.com>, topband@contesting.com
Subject: Re: Topband: Bad tower shunt capacitor
From: Jon Zaimes AA1K <jz73@verizon.net>
Date: Thu, 30 Jan 2014 04:21:10 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Look closely and you may see a hairline crack on the bad one.

Also look for other possibilities. A number of times I've swapped out "bad" matching capacitors without solving the problem, only to find later it was simply an oxidized connection that needed to be cleaned up and tightened down.

73/Jon AA1K


On 1/29/2014 7:26 PM, James C. Hall, MD wrote:
I have an omega matched 120 foot tower and I apparently have a bad vacuum 
variable capacitor. Upon applying more than about 300 watts, the SWR goes off 
scale. Tuning it out and trying again, yields the same thing.

The question is which capacitor is the culprit. These are surplus Soviet caps 
obtained from the Ukraine and, as I recall, the larger value capacitor is the 
parallel one, not the series one. I could buy one of each and switch one at a 
time and have a spare left over. Any suggestions ?

73, Jamie
WB4YDL

Sent from my iPad
_________________
Topband Reflector Archives - http://www.contesting.com/_topband


_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>