[Top] [All Lists]

Re: Topband: Topband Digest, Vol 144, Issue 4

Subject: Re: Topband: Topband Digest, Vol 144, Issue 4
From: Larry via Topband <>
Reply-to: Larry <>
Date: Thu, 04 Dec 2014 23:21:15 +0000
List-post: <">> wrote:
Message: 10 Date: Wed, 03 Dec 2014 23:41:36 +0100
From: Martin <>
Subject: Re: Topband: Restistance of wire
Message-ID: <> Content-Type: text/plain; charset=utf-8; format=flowed Topbanders, thank you for your comments. Looks like this wire was a good choice (in fact, i couldn't resist as it was free), many use it for their beverages. Thank you all. Now back to the shop building that switchbox..... Hear you soon.

Martin, I cannot speak for the suitability of this wire for a Beverage, as I have no experience with them, but I do know that WD1-A has a high DC resistance and a higher RF resistance.

I also know that ON4UN does not recommend it. My intention is to use 14 gage stranded THHN house wire for a BOG; will advise results when I have them.


Topband Reflector Archives -

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Topband: Topband Digest, Vol 144, Issue 4, Larry via Topband <=