Makes sense, Lee
Charlie
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Lee K7TJR
Sent: Monday, August 31, 2015 12:44 AM
To: topband@contesting.com
Subject: Topband: KD9SV-OK1RR relays ??? (RX Front End Protector)
I believe the point of having the transformers in their circuit is to
limit the maximum output.
A transformer (ferrite in this case) can only output whatever maximum
current determined by the core saturation level. They are relying on this
property of the transformers to limit the current into the clipping diodes.
I believe it was ICE that came up with this technique sometime way back. The
diodes set the voltage level of clipping and the transformers limit the
maximum current or power into the diodes. The combination realizes a
somewhat soft clipping level with a fixed maximum output.
Common mode isolation comes for free along with the design.
Lee K7TJR
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|