| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: Weatherproofing F-type connectors |
| From: | Ron Kolarik <rkolarik@neb.rr.com> |
| Date: | Sat, 19 Dec 2015 12:07:22 -0600 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
If you plan on doing a lot of the "F" connectors get a proper torque
wrench along
with the prep tools. PPC connectors, rubber boots for the female side
and silicone
grease are all good. Search for "F connector torque wrench" will get you
some good
click types and you don't have to spend a bunch on the pro tools. Ron K0IDT _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: 160M Propagation, Bill Breeden |
|---|---|
| Next by Date: | Topband: F-type connectors transmitting question, Michael St. Angelo |
| Previous by Thread: | Re: Topband: Weatherproofing F-type connectors, Kenneth Grimm |
| Next by Thread: | Re: Topband: Weatherproofing F-type connectors, Kris Mraz |
| Indexes: | [Date] [Thread] [Top] [All Lists] |