Frank,
he coil of wire on the end will add an inductance... and terminating to a
resistor at the other end probably wont make a difference. Basically you
now have an unterminated beverage. It will be bi-directional and the
receiving angle will be higher.
Maybe instead you can strip some insulation off of the wire and ground
(with resistor) before the coil? I think I would short the coil just to be
safe so leave the end exposed on the reel as you wind up. Or just cut the
antenna short and splice repair later.
Greg N2GZ
On Mon, Dec 28, 2015 at 4:15 PM, dl8yhrfrank--- via Topband <
topband@contesting.com> wrote:
>
>
> Hi all...
> Wondering if annyone ever had same problem and knows if it works ore not
> I have several Fileds from differend farmers in use...ometimes i can set
> 300m beverage..sometimes i must short them for few weeks to 200 ore less..
> Will it work if i keep the rest wire...maybe 50 to 100m....on the cabel
> reel and set the resistor on the end in the time when farmers needs the
> fields ore will this not work?
> Annyone may tryed?Wire is isolated wire,,,
> Anny Info vy welcome
> Vy 73
> Frank
> DL8YHR
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|