Herbert Schoenbohm <herbert.schoenbohm@gmail.com> wrote:
> where is the best placement for for a feed-line choke?
At each point where the common to differential mode conversion is likely to
happen.
In other words, where the current on the outside of coax shield is likely to
get inside coax.
Primary target points are those where the coax [potentially] opens to the outer
world:
antenna end, station end, coax extension joints, and similar.
In addition, placing several chokes at lambda/4 distance from each other
will make it difficult to develop large coax shield currents in the first place.
73,
Sinisa YT1NT, VE3EA
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|