Good grief! Well, if you're dead-set on using one of those on 160, how
about a K2AV folded counterpoise inside the building? ;-)
73, Mike
www.w0btu.com
On Thu, Jun 23, 2016 at 5:35 PM, Mike Smith VE9AA <ve9aa@nbnet.nb.ca> wrote:
> I have ZERO access outside the shack Mike.
>
> I have the 3 coaxes in the shack and that’s quite literally IT, hi hi
>
>
>
> AA
>
>
>
> Mike, Coreen & Corey
>
> Keswick Ridge, NB
>
>
>
> *From:* Mike Waters [mailto:mikewate@gmail.com]
> *Sent:* June 23, 2016 7:34 PM
> *To:* Mike & Coreen Smith VE9AA
> *Cc:* topband
> *Subject:* Re: Topband: Best way to jury rig a quick 160m contest antenna?
>
>
>
> Mike,
>
> Have you considered an *elevated* radial at the near end of the coax
> feeding the 80m dipole? Connect the shield and center conductor together;
> and connect that to a tuner with either K2AV's folded counterpoise --or a
> 132' resonant wire-- 10' high.
>
> That antenna tuner will have to be determined by experiment. I would bring
> along a box of components (variable and fixed capacitors and inductors ).
>
> 73, Mike
> www.w0btu.com
>
> On Jun 23, 2016 4:16 PM, "Mike Smith VE9AA" <ve9aa@nbnet.nb.ca> wrote:
> >
> > I have no access to the existing antennas, tower, ends of antennas, nor
> can
> > I run any wires outside.
> >
> >
> > Pretend you wake up in a locked room. You have 3 coaxes. Tribander, 40m
> &
> > 80m.
> >
> > The challenge; Get on 160m !
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|