Hi Larry,
We use here our piece of software:
http://lowbandsystems.com/product/remote-controll-software-rx-globe
Which is obviously replicates our 8 direction harware controller LBC-8:
http://lowbandsystems.com/product/lbc-8-controller
And designed to control IP switch:
http://lowbandsystems.com/product/ethernet-interface-8-ports-ro
being a true Ethernet IP interface, it does allow to control remotely
(bypassing hardware controller):
- ANY receive relay switch AND array controller you can think of;
- switch manually or in auto 3 band pass filters;
- switch 2 preamps;
- select among 3 different receive antenna systems if your are lucky to
have them;
- custom AZ map of course (or any lovely image as BMP file;
Most of Remote installations is different, custom designed, but this
software, controller and IP device is almost unlimited in features.
2016-09-12 19:59 GMT+03:00 Larry - K1UO <k1uo@tds.net>:
> Is anyone on here controlling their HI-Z 4-8 Pro (or similar) remotely over
> an Ethernet or VPN connection? If so, what equipment are you utilizing to
> do this? I am trying to eliminate controlling remotely via a USB
> connection
> at the remote location PC using Teamviewer.
>
> Thanks for any suggestions
> Larry K1UO
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
--
Andrey Fedorishchev,
RA6LBS
http://ra6lbs.ru/info/ru/
http://lowbandsystems.com/
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|