Hi Luis,
Your question about the BOG wire.
After my last email........ thinking possibly you were writing about
single wire BOGs.
In this case the wire size is not important other than large enough not
to break.. The insulation should be good
I like plastic insulation.
My opinion: Better to try one BOG antenna first, solve the
problems, then add more.
Bruce-k1fz
Hi, I have several questions, I am interested in setting up antennas
reception BOG in a key antenna RCS-10, I would like to put in the same key
6 BOG's and 2 Beverages I already own, each Beverage is also 0 degrees to
600 feet that look about the USA and Europe at 45 degrees to 700 feet.
I would like that the BOG's were cut and functioned for 40-80-160 between
Good and Very Good was excellent for the 3 bands that is almost impossible.
They can be placed in the same Swiche all antennas?
As it would be better to feed them with 59 or RG6 RG?
The cable from the key to the radius is 40 meters RG 59 or better RG6?
I know that each antenna must place a ground rod, I can make a copper tube
1.50 meters?
I use Bafles duplex wire gauge 20 or 22 that is right or should be thicker?
How far should I place each transformer to not interact or be fed antennas
key interaction is reduced?
For now these are the questions that I have to do.
Thank you very much and I look forward to the answers.
Sincerely
HK6P
LUIS
PD was experimentacion but if anyone knows more and can save money by not
consult those who know
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|