Re: Topband: Ferrites on antenna feed line

[Mike Waters <mikewate@gmail.com>]

I don't recall if the OP stated how close the antenna is to the house,
power lines, etc. But feedline chokes are something to consider.

My first thought was a couple of FB-73-801 beads on the internal power
leads feeding the stove's microprocessor area, and perhaps the keypad. But
I would try the #31 beads over the 240 volt wiring.

73, Mike
www.w0btu.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband