Sorry to hear that. But to avoid confusion for the guy asking about the
trees case, we should be crystal clear that houses (which are filled with
metal stuff) and antennas (made of usually resonant + metal stuff) are in a
*completely different category* than a minimally interacting thing like a
tree, especially when it's several feet from the antenna.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Joe Galicic
Sent: Monday, November 14, 2016 3:54 PM
To: Paul@PaulFerguson.us ; topband@contesting.com
Cc: k7tjr@msn.com
Subject: Re: Topband: FW: Hi-Z Around Trees
I could never get my hiz 2-3 (3 element,4 directions) working on my small
quarter acre lot. Too close to trees, houses and antennas. Worked with
Lee for a long time trying. No luck. N3HEE
Sent from XFINITY Connect Mobile App
-----Original Message-----
From: Paul@PaulFerguson.us
To: topband@contesting.com
Cc: k7tjr@msn.com
Sent: 2016-11-14 9:49:58 AM
Subject: Re: Topband: FW: Hi-Z Around Trees
Lee,
Thanks for the guidance.
I plan to use 20-foot fiberglass tube with a wire down the center for
Hi-Z array elements. Would you expect sensitivity to nearby trees to be
about the same for these wire elements versus aluminum tube elements.
73,
Paul
K5ESW
Greetings Top-Banders, I have been away for a couple days, sorry for
the late comments.
The fact is, for me there is no definitive answer to the effect of
trees on the Hi-Z arrays. I have made tests measuring phase shifts
and amplitude changes with a variety of objects around these
elements. My original thoughts after the tests were that any tree or
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|