Elan,
Need to use the coax impedance that the BOG transformer was manufactured for:
If F fitting use 75 ohm coax like RG-6
If SO-239 larger coax fitting ,then use 50 ohm coax like RG-58 or RG-8.
73
Bruce-k1fz
Thu, 19 Oct 2017 19:07:51 +0000 (UTC), "E.P" wrote:
HI is it better to feed the BOG with RG-6U VERSION or normal rg6 ? there is
some different i like to try it since i use 50 ohm rg58 wonder is this will
make a lot of different ?thank you vy 73 elan g0uut
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|