| To: | topband <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: WireSpear antenna for topbands |
| From: | Mike Waters <mikewate@gmail.com> |
| Date: | Thu, 11 Jan 2018 19:43:34 -0600 |
| List-post: | <mailto:topband@contesting.com> |
Well, this is certainly different. At first glance, it appears that each section capacitively couples to the next one. - Have you modeled this? - What is the advantage as compared to other common 160m antennas? - And most importantly, What's the pattern and gain? 73, Mike www.w0btu.com On Thu, Jan 11, 2018 at 6:49 PM, Eugene Popov /RA0FF/ via Topband < topband@contesting.com> wrote: > Since the fall of 2017 I have been experimenting with a new type of > antenna, which I called WireSpear (WS). > _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: WireSpear antenna for topbands, Eugene Popov /RA0FF/ via Topband |
|---|---|
| Next by Date: | Re: Topband: WireSpear antenna for topbands, Eugene Popov /RA0FF/ via Topband |
| Previous by Thread: | Topband: WireSpear antenna for topbands, Eugene Popov /RA0FF/ via Topband |
| Next by Thread: | Re: Topband: WireSpear antenna for topbands, Eugene Popov /RA0FF/ via Topband |
| Indexes: | [Date] [Thread] [Top] [All Lists] |