Topband
[Top] [All Lists]

Re: Topband: Adding chicken wire or mesh on top of radial field

To: W0MU Mike Fatchett <w0mu@w0mu.com>
Subject: Re: Topband: Adding chicken wire or mesh on top of radial field
From: Eugene Colton <epcolton@gmail.com>
Date: Mon, 29 Jan 2018 10:50:43 -0700
List-post: <mailto:topband@contesting.com>
My experience it helped a lot on top of my minimal 160 radial field by
adding much wire square footage to the ground radials.  It might not add
much improvement to a very extensive 160 radial field however.  Expect your
SWR to increase somewhat.
AF9O

On Sat, Jan 27, 2018 at 11:55 AM, W0MU Mike Fatchett <w0mu@w0mu.com> wrote:

> I have some 6ft wide chicken wire I can roll out on top of my existing
> radial field for 160.  Does anyone have an idea what this might do?
>
> W0MU
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>